Sell your Square D Power-Zone 4 low-voltage switchgear.
Low-voltage metal-enclosed drawout switchgear with ANSI-rated Masterpact power circuit breakers, built to ANSI C37.20.1 and Listed to UL 1558.. Also sold as Schneider Electric Power-Zone 4, Powerzone 4, Power-Zone 4 Arc Resistant, Power-Zone 4 with Masterpact. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the switchgear nameplate with the Square D factory order number and ratings, and each Masterpact breaker's label and MicroLogic trip unit.
| Type | Low-voltage metal-enclosed drawout switchgear with ANSI-rated Masterpact power circuit breakers, built to ANSI C37.20.1 and Listed to UL 1558. |
|---|---|
| Manufacturer | Square D, Schneider Electric Power-Zone 4, Powerzone 4, Power-Zone 4 Arc Resistant, Power-Zone 4 with Masterpact |
| On the nameplate | Power-Zone 4, Class 6037 |
| Breakers inside | Masterpact NW, Masterpact NT, Masterpact MTZ |
| Voltage | 600 Vac maximum |
| Ampacity | 1600 to 6000 A, main breaker or main lugs |
| Short-circuit | Up to 200 kA at 240 and 480 V, 130 kA at 600 V |
| Breakers | Masterpact NW, NT, MTZ1, MTZ2, MTZ3 |
| Standards | ANSI C37.20.1, UL 1558 |
| Arc-resistant | ArcBlok version, 100 kA at 635 V, Type 2B |
- Complete lineups with Masterpact breakers bring the highest offers.
- ArcBlok arc-resistant lineups bring more than standard gear.
- Higher interrupting breakers (up to 200 kA at 480 V) add value.
- Missing breakers or damaged racking rails reduce value.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
Up to eight Masterpact NT or MTZ1 800 A breakers fit in one 30 inch section, which makes Power-Zone 4 compact for its rating. Breakers of the same frame size and interrupting rating are interchangeable between cells. Power-Zone 4 is switchgear to UL 1558; the similar-looking QED-6 uses the same Masterpact breakers but is a UL 891 switchboard.
Three photos price most Square D Power-Zone 4 low-voltage switchgear offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
The lineup nameplate is usually on the front of the main section. Each breaker has its own nameplate on the front escutcheon. One breaker plate per frame size plus the lineup plate is enough to price it.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections ship separately with the breakers removed and palletized. Sections commonly run 1,000 to 3,000 pounds each. We plan the rigging and the truck.
Selling a Square D Power-Zone 4 low-voltage switchgear: what people ask.
It is low-voltage switchgear Listed to UL 1558. The QED-6 is the switchboard version. We buy both.
Yes. We buy Masterpact breakers alone or with the lineup.
Yes. We buy new surplus and used lineups and handle removal.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.