Sell your Eaton Magnum DS low-voltage switchgear.
Low-voltage metal-enclosed drawout power circuit breaker switchgear to UL 1558, with Magnum DS power circuit breakers, front or rear access.. Also sold as Cutler-Hammer Magnum DS switchgear, Magnum DS metal-enclosed switchgear, Eaton Magnum DS ArcGard. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the switchgear nameplate with the general order number and ratings, and each Magnum DS breaker nameplate and trip unit. Note frame sizes and whether each breaker is manually or electrically operated.
| Type | Low-voltage metal-enclosed drawout power circuit breaker switchgear to UL 1558, with Magnum DS power circuit breakers, front or rear access. |
|---|---|
| Manufacturer | Eaton, Cutler-Hammer Magnum DS switchgear, Magnum DS metal-enclosed switchgear, Eaton Magnum DS ArcGard |
| On the nameplate | Magnum DS |
| Voltage | Up to 635 Vac |
| Bus (rear access) | Horizontal main bus up to 10,000 A, vertical riser bus up to 5000 A |
| Bus (front access) | Horizontal main bus up to 6000 A, 100, 150 or 200 kA bracing |
| Short-circuit | Withstand up to 200 kA without fuses; ArcGard arc-resistant rated 100 kA at 508 V and 85 kA at 635 V |
| Standard | UL 1558 |
| Versions | Rear access, front access, ArcGard arc-resistant |
- Complete lineups with all Magnum DS breakers bring the highest offers.
- Breakers with Digitrip 1150 or newer trip units add value.
- ArcGard arc-resistant lineups and 5000 A or larger mains bring more.
- Water damage or missing breakers lower value sharply.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
Surplus listings show Magnum DS lineups built as early as 2001, sold under the Cutler-Hammer name before Eaton labels took over. The front-access version fits where rear access is not possible, with breaker sections 18, 22 or 44 inches wide and a standard depth of 40.2 inches. Breakers can be levered through the closed door. Rear-access lineups carry the higher bus ratings, up to 10,000 A on the main bus.
Three photos price most Eaton Magnum DS low-voltage switchgear offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
The lineup nameplate is usually on the front of the main section. Each breaker has its own nameplate on the front escutcheon. One breaker plate per frame size plus the lineup plate is enough to price it.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections ship separately with the breakers removed and palletized. Sections commonly run 1,000 to 3,000 pounds each. We plan the rigging and the truck.
Selling a Eaton Magnum DS low-voltage switchgear: what people ask.
Yes. We buy breakers alone or with the lineup, in any condition.
Yes. Data center decommissioning is a common source for us, and we handle removal.
Yes. Send a photo of each trip unit face. Newer Digitrip units add value.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.