Sell your Square D QED-6 rear-connected switchboard.
Rear-connected, compartmentalized low-voltage switchboard to UL 891 with drawout Masterpact and plug-in PowerPact breakers.. Also sold as Square D Power-Style QED-6, QED-6 Masterpact switchboard, Schneider Electric QED-6. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the switchboard nameplate and each breaker compartment with its Masterpact or PowerPact label and MicroLogic trip unit. Count the drawout breakers by frame.
| Type | Rear-connected, compartmentalized low-voltage switchboard to UL 891 with drawout Masterpact and plug-in PowerPact breakers. |
|---|---|
| Manufacturer | Square D, Square D Power-Style QED-6, QED-6 Masterpact switchboard, Schneider Electric QED-6 |
| On the nameplate | QED-6, Power-Style QED-6 |
| Breakers inside | Masterpact NW, Masterpact NT, PowerPact D, PowerPact H, PowerPact J |
| System ampacity | 1200 to 5000 A |
| Bus | Silver-plated bolted copper, up to 6000 A |
| Short-circuit | Up to 200 kA at 240 V, 150 kA at 480 V |
| Breakers | Masterpact NW and NT drawout; PowerPact D, H and J plug-in |
| Standard | UL 891, NEMA PB-2 |
| Enclosures | NEMA 1 indoor, NEMA 3R outdoor |
- Drawout Masterpact NW mains and feeders are the main value in a QED-6.
- Complete switchboards with all breakers bring far more than empty sections.
- MicroLogic P and H trip units add value over basic A units.
- Damaged cradles or missing racking handles lower value.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
QED-6 looks like switchgear because every breaker is drawout and compartmentalized, but it is a UL 891 switchboard, not UL 1558 switchgear. Masterpact breakers can be racked with the compartment door closed, and the control wiring is reachable from the front. Masterpact and PowerPact breakers are UL 489 listed, which keeps them easy to resell on their own.
Three photos price most Square D QED-6 rear-connected switchboard offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
The switchboard nameplate is usually on the front of the main section, sometimes inside the door. Shoot it with the voltage, ampacity, short-circuit rating, and series in frame. Then a close shot of each breaker label.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections typically split for shipping, with each running several hundred to a couple thousand pounds. Breakers can stay in for shipping or come out and pallet. We plan it.
Selling a Square D QED-6 rear-connected switchboard: what people ask.
No. QED-6 is a UL 891 switchboard and Power-Zone 4 is UL 1558 switchgear. Both use Masterpact breakers and we buy both.
Yes, though complete switchboards bring the best offers.
Yes. We buy NW and NT breakers and their cradles.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.