Sell your Square D Masterclad metal-clad switchgear.
Medium-voltage drawout metal-clad switchgear with 3-cycle type VR vacuum circuit breakers, indoor or outdoor, UL Listed to IEEE C37.20.2.. Also sold as Schneider Electric Masterclad, Masterclad MV switchgear, Masterclad with VR breakers. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the Masterclad lineup nameplate with the Square D factory order number, and each VR breaker nameplate. Note indoor NEMA 1 or outdoor NEMA 3R and walk-in or non-walk-in.
| Type | Medium-voltage drawout metal-clad switchgear with 3-cycle type VR vacuum circuit breakers, indoor or outdoor, UL Listed to IEEE C37.20.2. |
|---|---|
| Manufacturer | Square D, Schneider Electric Masterclad, Masterclad MV switchgear, Masterclad with VR breakers |
| On the nameplate | Masterclad, VR, Class 6055 |
| Nominal voltage | 4.16, 7.2, 13.8 and 24.9 kV |
| Max voltage | 4.76, 8.25, 15 and 27 kV |
| BIL | 60 kV (4.76 kV), 95 kV (8.25 and 15 kV), 125 kV (27 kV) |
| Continuous | 1200 to 4000 A through 15 kV; 1200 to 2000 A at 27 kV |
| Short-time | 25 to 63 kA, 3 seconds |
| Breaker | Type VR horizontal drawout vacuum breaker, Type RI stored energy mechanism |
- Complete lineups with VR breakers bring far more than empty cells.
- 15 kV lineups at 3000 A or 4000 A and 50 to 63 kA are the most sought.
- Arc-resistant Masterclad versions bring more than standard gear.
- Corrosion in outdoor non-walk-in units reduces value.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
Masterclad is Schneider Electric's Class 6055 metal-clad family, sold under the Square D brand. The VR breaker rolls straight to the floor from the lower cell, and it carries a permanently mounted manual charging handle. Shutters are driven by the racking mechanism, and the breaker can be racked with the door closed. Lineups were built two-high indoor and in outdoor walk-in and non-walk-in enclosures.
Three photos price most Square D Masterclad metal-clad switchgear offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
Each section carries a nameplate, usually inside the front door or on the instrument panel. Photograph the lineup nameplate, one breaker nameplate per type, and a wide shot of the whole lineup with doors closed.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections typically ship split, one or two vertical sections per pick. Each section can run from 1,500 to over 5,000 pounds with the breakers out. Breakers ride separately on pallets. We bring the rigging plan; you tell us about door widths and floor access.
Selling a Square D Masterclad metal-clad switchgear: what people ask.
Yes. We buy complete lineups, partial lineups and loose VR breakers.
No. Masterclad is medium-voltage metal-clad gear. Power-Zone 4 is low-voltage switchgear. We buy both.
Yes. We buy 5, 15 and 27 kV Masterclad in any condition.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.