
Dead boards and CPUs out of your data center.
Data centers go through motherboards. Failed boards stack up in the parts cage, and a refresh pulls whole racks of servers at once. Send photos and the site address. We set a date, load it, and haul it off.
Book a pickup
Every board, any shape it's in.
Burnt, cracked, stripped for parts, or pulled still working in a refresh. Boards can sit loose in a gaylord or stay in the chassis. Mixed loads are fine. Pull any drives that have to stay with you, and tell us about batteries up front.
- 01Server boardsBoards out of rack and blade servers, any socket count, CPUs and heat sinks on or off
- 02Burnt and damaged boardsScorch marks, blown caps, surge damage, bent socket pins. The ones the vendor won't take back on an RMA
- 03Pulled CPUsXeon and EPYC, loose or in trays. Older Opterons and desktop chips too
- 04Desktop motherboardsATX and micro-ATX boards, plus the proprietary OEM boards out of office towers and workstations
- 05Memory and cardsServer and desktop memory, any generation. GPU cards, network cards, RAID controllers, risers
- 06Servers and bladesRack servers from 1U up, blades and blade chassis, tower servers, whole or half stripped
- 07Storage and network gearDrive shelves, JBODs, storage arrays, network switches, routers, firewalls
- 08Power supplies and rack partsHot-swap PSUs, rack PDUs, rail kits, fans, cable management arms
Desktops, laptops, monitors, TVs, printers and copiers, desk phones, cell phones, and cables by the box. Put them in the same photos and we'll go over them on the call.
Four steps from the first photo to a loaded truck.
- 01Send photos and the site address
A wide shot of the pile and a close one of the boards. Text them to (832) 714-1647. If you use the form on this page instead, we'll get the photos when we call back.
- 02Tell us roughly how much
Count it in servers, pallets, gaylords, or a cage's worth. Say what floor the gear sits on and whether there's a dock or a freight elevator.
- 03We call back and set a date
We call during business hours. Have your deadline, the building's access rules, and the dock hours handy. We'll work out a pickup day on the call.
- 04We load it and haul it off
Tag anything that stays. We load what we went over on the call and take it away.
Before the truck shows up.
Yes. Dead and burnt boards are the main thing we're here for. Nobody has to test them first, and the dead ones can ride with the working ones.
No. Boards can go with the processors in the socket, the heat sinks on, and the sticks in the slots. CPUs that were already pulled can ride in their trays or a box on the same load.
Before pickup, pull any drives that have to stay in your custody. Check the servers as well as the drive shelves and storage arrays, and look for M.2 boot drives on the board or on a riser card. Anything else about drives, raise it on the call.
Tell us up front. That includes rack-mount UPS units and the battery packs on some RAID controllers. Loose batteries, lithium most of all, need specific packing before transport.
Usually, yes. Electrical gear is our main business. We buy switchgear, breakers, panelboards, and dry-type transformers. Send nameplate photos of the switchgear and the floor PDUs and we'll go over them on the call. You de-energize and lock out before we move any of it.
Businesses and organizations. Data centers and colo tenants are the main ones, since that's where the dead boards pile up. Any company with a server room or an IT closet to clear out works too.
Send photos of the pile.
Fastest is a text. Photos and the site address are enough to start. We call back during business hours to set a date.
Electrical gear we buy