Sell your Eaton Pow-R-Line C switchboard.
Low-voltage distribution switchboard to UL 891 and NEMA PB-2 with insulated case and molded case breakers or fusible switches.. Also sold as Cutler-Hammer Pow-R-Line C, PRL-C switchboard, Pow-R-Line C distribution switchboard, Eaton integrated facility switchboard. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the switchboard nameplate on each section and the main breaker nameplate and trip unit. Photograph the distribution panel so we can count feeder breakers and frame sizes.
| Type | Low-voltage distribution switchboard to UL 891 and NEMA PB-2 with insulated case and molded case breakers or fusible switches. |
|---|---|
| Manufacturer | Eaton, Cutler-Hammer Pow-R-Line C, PRL-C switchboard, Pow-R-Line C distribution switchboard, Eaton integrated facility switchboard |
| On the nameplate | Pow-R-Line C, PRL-C |
| Breakers inside | Magnum SB, NRX |
| Voltage | Up to 600 Vac or Vdc |
| Main bus | Up to 6000 A |
| Interrupting | Up to 200 kAIC |
| Mains | Magnum SB insulated case 800 to 5000 A; Magnum DS and DS/DSL power breakers; molded case 400 to 2500 A |
| Newer builds | NRX insulated case breakers with PXR trip units |
| Access | Front or rear accessible, indoor or outdoor |
- Magnum SB or Magnum DS drawout mains add more value than fixed molded case mains.
- Distribution sections full of Series C breakers add value.
- 4000 A and larger mains and copper bus bring more.
- Front-accessible units that fit against a wall are easy to resell.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
The main device helps date a board: Pow-R-Line C catalogs have listed DS and DSL power breakers, Magnum SB insulated case and Magnum DS breakers, and current builds use NRX insulated case breakers with PXR trip units. Front-accessible versions align at the rear so the switchboard can sit against a wall. Eaton bought Westinghouse's distribution and control business in 1994, and Pow-R-Line boards carry Cutler-Hammer or Eaton labels depending on age.
Three photos price most Eaton Pow-R-Line C switchboard offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
The switchboard nameplate is usually on the front of the main section, sometimes inside the door. Shoot it with the voltage, ampacity, short-circuit rating, and series in frame. Then a close shot of each breaker label.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections typically split for shipping, with each running several hundred to a couple thousand pounds. Breakers can stay in for shipping or come out and pallet. We plan it.
Selling a Eaton Pow-R-Line C switchboard: what people ask.
Yes. We buy Pow-R-Line C switchboards with any main device, complete or partial.
Yes. We buy Westinghouse, Cutler-Hammer and Eaton switchboards of any age.
Yes. We buy Magnum SB, Magnum DS and NRX breakers on their own.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.