Sell your Eaton Cutler-Hammer DH heavy duty safety switch.
Heavy duty fusible and non-fusible enclosed safety switch, 240 V or 600 V. Also sold as Cutler-Hammer DH361FGK disconnect, Eaton heavy duty disconnect, Eaton DH non-fused disconnect. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
The catalog number is on the label inside the door. Photograph the label, the handle and the enclosure. Older units may carry Westinghouse or Cutler-Hammer branding with the same DH numbering.
| Type | Heavy duty fusible and non-fusible enclosed safety switch, 240 V or 600 V |
|---|---|
| Manufacturer | Eaton, Cutler-Hammer DH361FGK disconnect, Eaton heavy duty disconnect, Eaton DH non-fused disconnect |
| On the nameplate | DH22, DH26, DH32, DH36 |
| Duty | Heavy duty, visible double break rotary blade mechanism |
| Voltage | 240 Vac or 600 Vac |
| Amperes | 30 to 1200 A |
| Poles | 2 or 3 (with or without neutral) |
| Enclosures | NEMA 1, 3R, 12/3R, 4X 304 stainless |
How to read a Eaton Cutler-Hammer DH heavy duty safety switch catalog number.
DH is heavy duty. Next digit is poles. Next is voltage (2 = 240 Vac, 6 = 600 Vac). Next is amps (1 = 30, 2 = 60, 3 = 100, 4 = 200, 5 = 400, 6 = 600, 7 = 800, 8 = 1200 A). Then the type letter: F = fusible without neutral, N = fusible with neutral, U = non-fusible. Then the enclosure letter: G = NEMA 1, R = NEMA 3R, D = NEMA 12/3R, W = NEMA 4X 304 stainless. The final letter is a design code (K on most ratings, C on 1200 A).
Not sure? Type it into the catalog lookup or text a photo of the label.
- Stainless W suffix and NEMA 12 D suffix enclosures are worth more than painted NEMA 1.
- 400 to 1200 A switches carry far more value than 30 and 60 A units.
- New in the box with intact labels brings the most.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
Eaton DH numbers put the type and enclosure letters after the rating digits, unlike Square D, so DH363URK reads as 3 pole, 600 V, 100 A, non-fused, NEMA 3R. The 1200 A units end in C instead of K. Eaton markets these with a visible double break rotary blade and triple padlocking.
Three photos price most Eaton Cutler-Hammer DH heavy duty safety switch offers.
The label
The catalog number, straight on and in focus. For a pallet, one label per model plus a count.
The unit
Front, sides, and anything damaged. Doors open if it has them.
The lot
The whole pallet or shelf. New in box: the box labels.
The label is inside the door. The catalog number on it encodes duty, poles, voltage, amps, fusible or not, and the enclosure. That one photo is usually all we need.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Small switches palletize. A 30A switch is a few pounds; 800A and 1200A switches are hundreds. Liftgate trucks cover most loads.
Selling a Eaton Cutler-Hammer DH heavy duty safety switch: what people ask.
Yes. We buy DH switches new, used or failed, in any enclosure.
Yes. U type non-fusible switches are bought the same way as fusible.
Yes. Send the label photo and we will quote them individually.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.