Sell your Square D QED-2 switchboard.
Front-connected low-voltage distribution switchboard to UL 891 with I-Line or QMB group-mounted distribution sections.. Also sold as Square D Power-Style QED-2, QED-2 I-Line switchboard, Schneider Electric QED-2, Square D QED switchboard. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the switchboard nameplate on each section with voltage, ampacity and short-circuit rating, and the main breaker nameplate. Photograph the I-Line or QMB distribution section so we can count breakers and frame sizes.
| Type | Front-connected low-voltage distribution switchboard to UL 891 with I-Line or QMB group-mounted distribution sections. |
|---|---|
| Manufacturer | Square D, Square D Power-Style QED-2, QED-2 I-Line switchboard, Schneider Electric QED-2, Square D QED switchboard |
| On the nameplate | QED-2, Power-Style QED-2, QMB, Speed-D, Class 2741, Class 2742 |
| Breakers inside | I-Line |
| Voltage | 600 Vac or 250 Vdc maximum |
| Ratings | Through 5000 A and 200 kA |
| Bus | 5000 A horizontal, 3000 A vertical |
| Mains | Single mains to 5000 A; six subdivision mains to 4000 A |
| Distribution | I-Line circuit breakers or QMB fusible switches, group mounted |
| Access | Front or front and rear accessible, NEMA 1 or 3R |
- Switchboards with Masterpact or PowerPact electronic-trip mains bring more than thermal-magnetic mains.
- I-Line sections full of breakers add value; I-Line breakers resell readily.
- 3000 A and larger mains and copper bus bring more.
- Outdoor 3R units with rust or water intrusion lower value.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
The I-Line distribution panel lets a breaker plug onto the panel bus and then fasten to the pan with screws, which is why I-Line breakers are so easy to reuse. QMB is the group-mounted fusible switch alternative. Sections are 91.5 in high with base channels, and sections 3000 A or less ship with removable lifting bars. QED-2 is the front-connected line; Square D's rear-connected drawout line is QED-6.
Three photos price most Square D QED-2 switchboard offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
The switchboard nameplate is usually on the front of the main section, sometimes inside the door. Shoot it with the voltage, ampacity, short-circuit rating, and series in frame. Then a close shot of each breaker label.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections typically split for shipping, with each running several hundred to a couple thousand pounds. Breakers can stay in for shipping or come out and pallet. We plan it.
Selling a Square D QED-2 switchboard: what people ask.
Yes. We prefer them complete with the main and the I-Line breakers in place.
Yes. We buy I-Line breakers alone or with the switchboard.
Yes. New, never-energized switchboards are a big part of what we buy.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.