Sell your Eaton Cutler-Hammer Freedom 2100 motor control center.
NEMA/UL 845 low voltage motor control center, 600 V class. Also sold as Cutler-Hammer F2100 MCC, Eaton Freedom MCC, Eaton Freedom FlashGard MCC. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the lineup nameplate and the unit nameplate, plus the starter, overload and breaker labels. If the nameplate is missing, the handle style and bucket width identify the design: F2100 units use a lever handle and a 13-3/4 in. wide bucket.
| Type | NEMA/UL 845 low voltage motor control center, 600 V class |
|---|---|
| Manufacturer | Eaton, Cutler-Hammer F2100 MCC, Eaton Freedom MCC, Eaton Freedom FlashGard MCC |
| On the nameplate | F2100, Freedom 2100, FlashGard |
| Years | Freedom MCCs built 1995 to present per Eaton renewal-parts dating |
| Horizontal bus | Copper, 600 to 3200 A |
| Vertical bus | Fully rated copper, 600 to 1200 A |
| Bus bracing | 65 kA and 100 kA available |
| Section | 20 in. wide, 90 in. high, 16 or 21 in. deep front mounted, 21 in. back-to-back |
| Unit space | 72 in. per section in 6 in. increments |
| Starters | NEMA Size 1 to 7; plug-in units up to 400 A |
| Application | 230 V up to 300 hp, 480 V up to 600 hp |
- Freedom 2100 units fit Advantage, Series 2100 and 5 Star structures, which widens the pool of buyers for used buckets.
- FlashGard units with retractable stabs are worth more than standard plug-in units.
- Complete units with overload relay, control power transformer and door bring more than stripped buckets.
- Large feeders, VFD units and Size 4 to 7 starters carry more component value.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
Eaton's renewal-parts literature states that F2100, Advantage, Series 2100 and 5 Star unit wrappers are mechanically identical, all with a 13-3/4 in. bucket and 15-5/8 in. door. That is why Freedom buckets are routinely used to fill older Westinghouse lineups. Freedom units use Freedom Series starters, while Series 2100 and 5 Star originally used A200 starters. Eaton dates the Freedom MCC from 1995 and FlashGard from 2008.
Three photos price most Eaton Cutler-Hammer Freedom 2100 motor control center offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
Each vertical section has a nameplate, usually at the top of the section or inside the top door. Each bucket has its own label. One section plate plus a sample of bucket labels gets you a number.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections ship split, typically several hundred to a couple thousand pounds each. Buckets pull and palletize separately. We plan the rigging.
Selling a Eaton Cutler-Hammer Freedom 2100 motor control center: what people ask.
Yes. We buy single units, partial lineups and full MCCs. Photos of the unit nameplate and starter are enough to start a quote.
Yes. We buy FlashGard and standard Freedom units, new surplus or used.
Yes. Send photos of the handle, bucket width and starter, and we can identify the design.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.