Sell your Allen-Bradley CENTERLINE 2500 IEC motor control center.
IEC 61439 low voltage motor control center rated up to 690 V. Also sold as Rockwell CENTERLINE 2500 MCC, Bulletin 2500 MCC, IEC CENTERLINE 2500. New surplus, used, or failed. Send the nameplate, get a written offer.
Get an offerWhat it is
Photograph the column nameplate and the label on each withdrawable unit, plus the contactor, overload and breaker nameplates inside. IEC units are rated in kW and amps rather than NEMA sizes, so capture the device ratings directly.
| Type | IEC 61439 low voltage motor control center rated up to 690 V |
|---|---|
| Manufacturer | Allen-Bradley, Rockwell CENTERLINE 2500 MCC, Bulletin 2500 MCC, IEC CENTERLINE 2500 |
| On the nameplate | CENTERLINE 2500, Bulletin 2500 |
| Years | Rockwell discontinued CENTERLINE 2500 on July 31, 2025 and points customers to FLEXLINE 3500 |
| Rated voltage | Up to 690 V, 3 phase, 3 or 4 wire, 50/60 Hz |
| Horizontal bus | 800, 1250, 1600, 2000, 2500, 3200 or 4000 A |
| Vertical bus | 600 or 1200 A |
| Bus bracing | 50, 65, 80 or 100 kA symmetrical |
| Ingress protection | IP20, IP42 and IP54 |
| Standards | IEC 61439-1 and IEC 61439-2 |
- The line is discontinued, so intact units are useful to sites keeping existing 2500 lineups running.
- Complete withdrawable units with original devices are worth more than empty compartments.
- Higher bus ratings and complete columns with mains carry more value than single starter units.
- We do not publish prices. Metal, demand, and condition move them. You get a written number for your unit.
CENTERLINE 2500 is the IEC counterpart to the NEMA CENTERLINE 2100 and is built to IEC 61439 rather than UL 845. Rockwell ended sales on July 31, 2025 and names FLEXLINE 3500 as the migration path. ABS type approval lists ratings to 690 V and horizontal bus to 4000 A.
Three photos price most Allen-Bradley CENTERLINE 2500 IEC motor control center offers.
The nameplate
Straight on and readable. Voltage, ratings, model, and serial in frame.
Inside
Doors open: bus, devices, controls, and anything burned or missing.
The whole unit
A wide shot plus what is around it, so we can plan the pick.
Each vertical section has a nameplate, usually at the top of the section or inside the top door. Each bucket has its own label. One section plate plus a sample of bucket labels gets you a number.
- 01Send the nameplate
Photos or a list with counts. Text, email, or the form.
- 02We read it and reply
During business hours, by whatever contact method you picked.
- 03You get a written offer
Per unit or per lot. Freight is in the number.
- 04We pick up and pay
Our truck and our rigging. Wire or ACH within 3 business days of a passed inspection.
Freight: Sections ship split, typically several hundred to a couple thousand pounds each. Buckets pull and palletize separately. We plan the rigging.
Selling a Allen-Bradley CENTERLINE 2500 IEC motor control center: what people ask.
Yes. We buy new surplus and used 2500 columns and units. Send the column nameplate and unit labels.
Yes. We buy IEC rated MCCs. The device nameplates tell us what we need.
Yes. We quote single units, partial lineups and complete MCCs.
Both. New surplus, used, untested, and failed all sell. Condition sets the number, not whether we buy.